×
Facebook Realizations

ALUPROF MB-104

MB-104 Passive is a system with the highest thermal insulation with thermal barrier. This system meets all the requirements for the moment in passive construction. These profiles are used to make doors, vestibules and spatial structures. These structures are watertight and airtight and have a very high strength. The MB-104 Passive system features two variants, i.e. SI and AERO. They are used depending on the requirements for thermal energy savings. The parameters that we are able to obtain on the constructions made of this system exceed the current strictest regulations and standards. Therefore, the system is addressed to energy-saving and passive construction.  
Technical data MB-104 Passive
Frame depth 95mm
Sash/leaf depth 95mm
Door glazing thickness 27-72mm
Max. sash/leaf dimensions 1400mmx3000mm (W x H)
 The MB-60E system is used for making doors with a thermal barrier, but also window sets with doors. Structures made of this system achieve good functional properties and high technical parameters, as well as an economic level of production costs.  This system is closely connected with the MB-60 system, which allows the use of common accessories and glazing beads. The structural sections are 60 mm thick. The surface of the door leaves is flush with the frame from inside and outside. We use fittings, locks and hinges typical to European standards. There is also a choice of thresholds and crossbars for the lower door leaves. The MB-60E system is an economical product. Entrance lobbies can be made with increased thermal insulation on MB-60E HI profiles. In the central chambers of the profiles, inserts are placed, which reduce the heat flow through the structure due to the low value of the heat transfer coefficient.  
Technical data MB-60E/MB-60E HI
Frame depth 60mm
Sash/leaf depth 60mm
Door glazing thickness 5-41mm
Max. door dimensions 1300mmx2300mm (W x H)

The MB-59S system with good thermal and acoustic insulation, used for the production of doors, vestibules, entrance lobbies, etc. The depth of structural sections is 50 mm for frames as well as for sashes/leaves.  Almost all window profiles are of three-chamber construction. The central chamber is an insulating chamber between the thermal breaks, which allowed to obtain slender, economical and rigid profiles. The outer surfaces of structural sections are flush with each other. An important advantage of the MB-59S system profiles is a large selection of hardware and methods of fitting them. Special grooves allow to mount various types of hinges, e.g. groove hinges or traditional surface hinges. It is also important that the profiles can be bent and assembled in various types of arch structures.
Technical data MB-59S/MB-59S HI
Frame depth 50mm
Sash/leaf depth 50mm
Door glazing thickness 4.5-31.5mm
Max. door dimensions 1100mmx2300mm (W x H)